The Amiko 4+2 Port 10/100M PoE (power over ethernet) network switch, lets you add more wired devices to your network with ease.

The Amiko 8+2 Port 10/100M PoE (power over ethernet) network switch, lets you add more wired devices to your network with ease.

This splitter is to be used when you have a POE NVR, which cable contains the power plus data so before the camera we need to use a POE splitter. That will separate the data to the RJ45 cable and the power to the power jack connector. It is intended for Amiko IP cameras that do not have PoE power.

The Amiko WR-522 Wi-Fi AP/Router will use an existing 802.11n wireless signal, repeat and extend it to a longer range where it is too far away for the router or access point to reach. This device supports 2.4GHz wireless network connection, and it can support 2.4GHz transmission speeds of up to 300Mbps. To better boost its signal, it comes with 2 external antennas, thus providing even better...

The new 3-in-1 high power outdoor Wireless POE Repeater/AP/Router from Amiko it is ideal to repeat and extend its signal to a longer range where it is too far away for the router or access point to reach.

Bracket and junction box for for Amiko's DVW20M4K POE IP cameras.

Corner holder for PTZ50S400 Amiko IPCam.

For the following Amiko IP cameras: - DW30M400MF WIFI POE - DW30M400MF POE - DW30M400MZOOM POE

For the following Amiko IP cameras: - DW30M400MF WIFI POE - DW30M400MF POE - DW30M400MZOOM POE

For the following Amiko IP cameras: - D20V200 POE - D20V400 POE

Infrared reflector from Amiko Home.

Device to test IP and analog cameras. Has a 7 inch touch screen with 1280*800 resolution, with HD image display.